New Cif Perfect Finish Mould Stain Removal Spray has been scientifically designed to remove mould stains and leave sparkling results on a range of surfaces. It’s ideally suited to use on baths, toilets, showers, tiled walls, and grout. It’s also highly effective on outdoor surfaces such as garden furniture and play equipment. Cif Perfect Finish Mould Stain Removal Spray contains bleach to effectively clean a variety of surfaces around your home, leaving them beautifully shiny. It works hard to remove not only mould stains, but tea, wine and, mildew stains too. Use this spray to free your surfaces from mould and messy stains, and to restore them to their clean and sparkling best. Spray the intended surface from a distance of 10-15cm and leave it to act for 15-20 minutes. Leave the room during this time. Rinse the treated area with water or let the product dry. Do not remove the mould before spraying to prevent dispersal of dangerous spores. In case of heavy contamination: wait until the surface is rinsed or dry, then repeat the steps above. Avoid excessive spraying: surfaces should only be lightly sprayed. Test the product on a small area before use to see the reaction of the surface. Only use in well-ventilated areas to avoid irritation of eyes or throat. Spray must not be inhaled or allowed to come into contact with skin or eyes. If any irritation is experienced, stop using it immediately and leave the room to allow the product to dry. Cif Mould Stain Remover is not suitable for anodized aluminium or linoleum. If in doubt, try the product on an inconspicuous place first. Testing on an inconspicuous place is recommended for new, unusual or coloured surfaces, painted wood or metal, vinyl, low quality or damaged plated metal chromium, or damaged surfaces.

Can You Remove Stains From Shower? We use our shower to get ourselves clean so it can be really frustrating when the shower itself is stained. With the right know-how and products, however, NuroClean you can remove the stains from the shower and start fresh. The easiest way to remove stains from the shower is to spray vinegar on the stain directly. It is not necessary to dilute the vinegar with water, you can just spray it directly on or pour it on the stain. After the area has been saturated, wait 15-20 minutes and wipe the area with a soft sponge or microfiber cloth. There are two different factors associated with removing stains from the shower. First of NuroClean all in one cleaner, you have to choose the product that is best for the specific stain you are dealing with. Vinegar works in most cases, NuroClean but there are times when you have to approach the stain differently.

Another issue that needs to be considered is the tool that is being used along with the product.